Snooze Function; Nap Timer - Brandt BCR97P Notice D'utilisation

DUAL ALARMS OPERATION
Before setting the alarm time, make sure the Clock has been set.
Setting Alarm 1 or Alarm 2
1. In clock time state, press
 "A1" and the hour digits will flash on the display.
2. While the hour digits are flashing, set hours for alarm 1 by repeatedly pressing or pressing & holding
/.
3. Press to confirm.
 The minute digits will flash.
4. Whilst the minute digits are flashing, set minutes for alarm 1 by repeatedly pressing or pressing &
holding /.
5. Press to confirm.
 "OFF" will flash on the display.
6. Whilst "OFF" is flashing, set the alarm to wake to the desired mode by repeatedly pressing /.
Rd = wake‐by‐radio
Bu= wake‐by‐buzzer
OFF= alarm off
7. Press to confirm.
 "A2" and hour digits will flash on the display. Follow steps 2 to 7 to set the alarm 2.
8. The alarm will sound for 3 minutes at the preset time on each day and come back again after 9
minutes. The alarm will last for 1 hour.
NOTE: When the alarm is sounding, pressing NAP or RADIO/SL will activate the nap timer or the radio
and stop the alarm for the day.
Snooze function
When the alarm sounds, press
snooze duration.
NOTE: If your second alarm activates while the first alarm is sounding or it is in the snooze mode, the
second alarm will override the first alarm (the first alarm will be reset to come on the next day).
NAP TIMER
The nap timer allows you to rest and automatically wake up in 5, 15, 30, 45, 60, 75 or 90 minutes.
1. Press NAP.
 The nap indicator will appear and "n05" will flash on the display.
2. While the nap time is flashing, repeatedly press NAP to select the desired nap time.
3. When the nap time has elapsed, the nap alarm will sound and the nap indicator will flash on
the display.
4. Press NAP to stop the nap alarm, the nap indicator will disappear from the display.
NOTE: If the nap timer is set then the alarm sounds, the nap alarm will be canceled automatically.
.
. The alarm will be turned off and come on again after the set
EN.5