Operator Safety Instructions - Amano Pioneer Eclipse FM-1700HD HDTR Manuel

Section - A
In this Operation Manual you will find three statements that you must read and observe to ensure safe operation of this
machine.
DANGER means: Severe bodily injury or death can occur to you or other personnel if the DANGER
statements found on this machine or in this Operation Manual are ignored or are not adhered to. Read
and observe all DANGER statements found in this Operation Manual and on your machine.
WARNING means: Injury can occur to you or to other personnel if the WARNING statements found on
your machine or in the Operation Manual are ignored or are not adhered to. Read and observe all
WARNING statements found in this Operation Manual and on your machine.
CAUTION means: Damage can occur to the machine or to other property if the CAUTION statments found
on your machine or in this Operation Manual are ignored or are not adhered to. Read and observe all
CAUTION statments found in this Operation Manual and on your machine.
DANGER:
Failure to read the Owner's Manual prior to operating or servicing your Pioneer Eclipse machine
could result in injury to you or to other personnel; damage to the machine or to other property could
occur as well. You must have training in the operation of this machine before using it. If you or your
operator(s) cannot read English, have this manual explained fully before attempting to operate this
machine.
DANGER:
To reduce the risk of fire, use only commercially available floor cleaners and waxes intended for
machine application.
DANGER:
A. Sanding/finishing wood floors can create an explosive or combustible environment. Do not operate
this machine around solvents, thinners, alcohol, fuels, floor finishes, wood dust or any other flammable
materials. Cigarette lighters, pilot lights, electrical sparks and all other sources of ignition should be
extinguished or avoided. Keep work area well ventilated.
B. Dust generated from sanding wood floors can spontaneously ignite or explode. Promptly dispose
of any sanding dust in a metal container clear of any combustibles. Do not dispose in a fire.
DANGER:
A. Electrocution could occur if the machine is being serviced while the machine is connected to a
power source. Disconnect the power supply before servicing.
B. Electrocution or fire could occur if the machine is being operated with a damaged power cord. Keep
the power cord clear of the pad. Always lift the cord over the machine. Do not move the machine by
the power cord.
C.Shock hazard. Do not use the machine if it has been rained on or sprayed with water.
DANGER:
To avoid injury keep hands, feet, and loose clothing away from all moving parts on the machine.
Disconnect the power cord before replacing the pad, changing the abrasive, or when servicing. Do
not operate the machine unless all guards are in place. Never leave the machine unattended while
connected to a power source.
WARNING:
Injury can occur if protective clothing or equipment is not used while using this machine. Always wear
safety goggles, protective clothing, and dust mask while operating this machine.
WARNING:
Maintenance and repairs performed by unauthorized personnel could result in damage or injury.
Maintenance and repairs must be performed by authorized personnel only. Keep all fasteners tight.
Keep adjustments according to specifications.

Operator Safety Instructions

4
English - EN