To Remove A Shelf; Electrical Connection - Caso Germany WineSafe 18EB Mode D'emploi

► Do not store bottles crosswaves on the interior floor! Otherwise, bottles
may fall out when the appliance door is opened and this may cause injury
or material damage.
10.5.8

To remove a shelf

Remove all bottles from the shelves. Lift the shelf upwards and the gently
pull it out.
► Ensure that the tabs are firmly engaged in place before storing any
bottles.
► Any of the wine shelves can be removed to accommodate larger bottles.
► Spread your bottles out as evenly as possible over the shelves, so weight
is not concentrated in one point; and make sure your bottles will not touch
the back of the cabinet.

10.6 Electrical connection

In order to ensure the safe and trouble-free operation of the device, the
following instructions must be observed for the electrical connection:
• Before connecting the device, compare the connection data (voltage and
frequency) on the rating plate with those of your electrical network. This
data must agree in order that no damages occur in the device. If in doubt,
ask your qualified electrician.
• The electrical outlet must be protected by a 16A safety cut-out switch.
caso Wine Safe 18EB
Please note
40