Connections - aldes Minisone Notice De Montage

CONNECTIONS

CONNECTIONS TO AERAULIC DUCTWORK
The metal sleeve of the circular MINISONE is a male fitting and features a stop
ring for simple positioning of the female duct. The damper should not support
any forces exerted by the ducts. The two ends of the metal sleeve (or tunnel) of the MINISONE
feature a lip seal for airtight closure, available as standard on all MINISONE to make installation
easier. The sleeves should be attached without mechanical pressure and should enable perfect
alignment of the ducts with the damper. Depending on the dimensions of the damper, the
mobile blade may require clearance in the duct.
ELECTRICAL CONNECTIONS
IMPLEMENTATION OF CONTACTS
1
3
DCU
2
4
FCU
17