Operating Elements; Packaging Contents - Oehlbach Phono PreAmp PRO Mode D'emploi

Operating elements

PHONE TYPE: By using the „Phono Type" switch you can select whether the device is to process an audio signal
from an MM or MC pickup system.
POWER: Press the Power switch to turn the unit on or off. The blue LED on the front of the unit will illuminate when
it is switched on.
Note
Before using the Phono PreAmp PRO please check to verify the pickup system used
by your turntable and set the PHONO TYPE switch accordingly.

Packaging contents

∙ Oehlbach Phono PreAmp PRO
∙ Power supply unit (18V/150mA)
∙ Instruction manual
Remarks
Please observe the following instructions in order to prevent any risk of fire, short-circuits or damage to the product:
1. Do not expose the product to rain or moisture. Do not place any containers filled with water on the product.
2. Do not install the product in a bookcase, fitted cupboard or similarly enclosed spaces. Please ensure that there
is sufficient ventilation for the product.
3. You should not cover the product or place items on the product in order to prevent short-circuits or fire due to
overheating.
4. Do not place the product in proximity to sources of heat, e.g. heaters, stoves, etc.
5. Do not use the product in proximity to naked flames or candles.
6. Only use a dry cloth to clean the product.
7. Functionality may be restricted depending on the configuration of the device.
8. Please only use qualified service personnel to carry out repairs or servicing work.
EU-compliance information
This product is eligible to bear the CE mark. It complies with the EU Low Voltage Directive 2006/95/EC;
EU Directive 2004/108/EC; EU RoHS Directive 2011/65/EC; EU Directive on Waste Electrical and Electronic
Equipment (WEEE) 2012/19/EC.You can obtain a free copy of the Declaration of Conformity by contacting
your retailer, distributor or the headquarters of Oehlbach Kabel GmbH. Contact information can be found at:
http://www.oehlbach.com.
6