Oehlbach Phono PreAmp PRO Mode D'emploi page 5

Thank you
for choosing an Oehlbach ® quality product. Please read these instructions carefully; this will
ensure the full and error-free functioning of the product.
Oehlbach's Phono PreAmp PRO is a high quality phono preamplifier. It enables you to connect a turntable to the
Line or Aux input on an amplifier or AV receiver that doesn't have a phono input. Both Moving Magnet (MM) and
Moving Coil (MC) pickup systems can be connected. The audio signals are amplified with extremely low-noise and
distortion-free properties.
Features
∙ Distortion-free and low-noise amplifier
∙ Supports MM and MC pickup systems
∙ Gold-plated contact
∙ Power supply via external power supply unit
Specification
Amplification at 1 kHz: 40 dB (MM); 60 dB (MC)
Signal-to-noise ratio (SNR): >72 dB (MM); > 60 dB (MC)
Channel difference: < 0.5 dB
Channel separation: > 70 dB (MM), >60 dB (MC)
Output voltage: 600 mV
Temperature range: -15 to +50 °C
Connections
Analogue audio outputs: 1 x RCA stereo jack R/L
Analogue audio inputs: 1 x RCA stereo jack R/L
Power supply: 1 x DC18V input
Phono PreAmp PRO
5