Technical Data; Safety Instructions; English; Specified Conditions Of Use - Berner BACHG 18V Notice Originale

TECHNICAL DATA

Heat Gun
Code
Battery voltage
Air temperature
Air volume
Permitted Ambient Temperature
Weight according EPTA-Procedure
01/2003 (1.5/2.0 Ah)
Weight according EPTA-Procedure
01/2003 (3.0/4.0/5.0 Ah)
Weight according EPTA-Procedure
01/2003 (9.0 Ah)
Recommended battery types
Recommended charger
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
shock, fi re and/or serious injury. Save all warnings and
instructions for future reference.

SAFETY INSTRUCTIONS

This appliance can be used by children
aged from 8 years and above and
persons with reduced physical,
sensory or mental capabilities or lack
of experience and knowledge if
they have been given supervision or
instruction concerning use of the
appliance in a safe way
and understand the hazards involved.
Children shall not play with the
appliance.
Cleaning and user maintenance shall
not be made by children without
supervision.
Danger of fi re if not used properly!
Take care if using the device in the
vicinity of combustible materials. Do
not direct the device towards the same
place for long periods.
Do not use the device in rooms with a
potentially explosive atmosphere.
Do not use the device in rooms in
which easily fl ammable material or
gases may be present.

ENGLISH

457 423 - BACHG18V.indd A14 457 423 - BACHG18V.indd A14
Heat can be conducted to combustible
BACHG 18V
materials that are concealed.
BACHG 18V 01
Do not leave the appliance
00001-99999
unsupervised when it is switched on.
18 V
470 °C
Do not use the device outside if it is
170 l/ min
raining.
-18 + 52 °C
Do not touch the hot air nozzle during
1.2 kg
operation (danger of burning!).
1.5 kg
Never cover or close the hot air nozzle.
1.8 kg
Do not point the hot air fl ow at people.
Do not use the device as a hair dryer.
BBP18V-X
BBC14.4-18V,
Allow the device to cool down for a
BBCF 14,4V-18V
while after use before packing it away.
WARNING! To reduce the risk of fi re,
personal injury, and product damage
due to a short circuit, never immerse
your tool, battery pack or charger in
fl uid or allow a fl uid to fl ow inside them.
Corrosive or conductive fl uids, such as
seawater, certain industrial chemicals,
and bleach or bleach containing
products, etc., can cause a short
circuit.
If the appliance is to be stored unused
for a long period, the batteries should
be removed.

SPECIFIED CONDITIONS OF USE

The device is suitable for soldering copper pipes, galvanizing
bodywork parts, welding plastics, thawing out water pipes or
heating metal parts
BATTERIES
Battery packs which have not been used for some time should be
recharged before use.Temperatures in excess of 50°C (122°F)
reduce the performance of the battery pack. Avoid extended
exposure to heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully
charged, after use.
To obtain the longest possible battery life remove the battery pack
from the charger once it is fully charged.
For battery pack storage longer than 30 days: Store the battery
pack where the temperature is below 27°C and away from
moisture Store the battery packs in a 30% - 50% charged condition
Every six months of storage, charge the pack as normal.
Do not dispose of used battery packs in the household refuse or by
burning them. Your power tool distributor will normally retrieve old
batteries to protect our environment.
Do not store the battery pack together with metal objects (short
circuit risk).
14
31.07.2018 07:19:02 31.07.2018 07:19:02