Krüger & Matz EXECUTIVE Mode D'emploi page 9

Owner's manual
• When the battery is charging, lights are flashing.
• When the battery is fully charged, all three lights are on.
Notes:
• please be sure the battery has been charged fully before first use.
• Charging continues even if the speaker is turned off.
• A speaker battery indicator will be displayed when connected to iOS devices.
• It is also possible to charge the speaker with the charging station (not included). In that
case, plug the power adapter (included with the speaker) into a power mains socket
and to DC input on the charging station. place the speaker on the charging station.
Make sure to correctly place the speaker on the station.
• It is also possible to charge external devices with the USB power port at the back of the
speaker. Firstly, make sure the speaker is turned on. Then connect one end of the USB
charging cord to the USB port of the speaker and then connect the other end into the
USB port of the device you are going to charge.
100% battery
Operation
Charging
60% battery
Low battery
30% battery
AUX mode
Bluetooth mode
Low battery
Bluetooth pairing mode
Bluetooth connection established
SPeciFicationS
• Output power: 2x 12,5 W
• Impedance: 6 Ω
• Frequency response: 50 Hz ~ 25 kHz
• THd: ≤0,6%
• S/N ratio: ≥92 dB
• Speaker diameter: 58 mm
• NFC
• MaxxBass technology
• ports: AUX-in (3,5 mm), headphone (3,5 mm), USB (external devices charging), DC-in
• Bluetooth 4.0
LED Status
Green charging LED is on
Red charging Led is flashing
Green AUX LED is on
Blue Bluetooth LED is on
Red Led & Blue Bluetooth Led are flashing alternately
Blue Bluetooth Led is flashing slowly
9