Cleaning The Unit; Cleaning The Filter - purline PLQ10M Manuel D'utilisation

3 Put the water tank back to its position (FIG.4)
The other hose extremity can be directed to a floor drain. The
hose must be made of rigid material it should not bend. The
hose must be below the continuous drain connector.
Be careful not to let the hose extremity get into the drain water.
PLEASE NOTE : when operating the dehumidifier in cool
conditions, you must ensure that the hose cannot freeze.
MAINTENANCE
Switch off and disconnect the unit before cleaning.

CLEANING THE UNIT

Always switch off and disconnect the dehumidifier from the
wall socket before cleaning. Wipe the unit shell with a soft
clean cloth and mild soap. Do not use detergents or abrasives
which could damage the plastic.

CLEANING THE FILTER

Switch off and disconnect the dehumidifier.
The filter is located behind the water tank (see figure)
1. Remove the water tank
2. Remove the filter
3. Vacuum the filter taking care of not damaging it.
4.
Replace filter & water tank.
If the filter is particularly dirty, use warm water.
Make sure the filter is completely dry before replacing.
Do not expose the filter to sunlight.
STORAGE
If not use the unit for an extended period of time:
- Please turn the unit off, unplug it.
-
Completely empty the water tank & wipe it clean.
-
Cover the unit & store where it will not receive direct
sunlight.
Pack your unit and the user manual in its original box and store
in a cool, well ventilated place.