Control Panel; Automatic Defrost; Emptying The Water Tank - purline PLQ10M Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

CONTROL PANEL

12
11
11- Water full indicator
12- Operation indicator
13- On/Off button + humidistat.
Operating instructions
Plug the power cord into a 230 V~ 50 Hz grounded wall outlet,
then turn the humidistat knob clockwise to start the
dehumidifier.
Your dehumidifier will start functioning.
CAUTION: This dehumidifier cannot be used at a room
temperature below 5°C.
13
1) This unit is with humidistat. Please set the humidistat
(humidity controller) to required humidity level (the
intensity of humidity extraction in increased clockwise).
For continuous working, set the humidistat to position
"MAX".
2) To turn off the unit, turn the humidistat to OFF position.

AUTOMATIC DEFROST

Your dehumidifier is fitted with an automatic defrost system.
When ambient temperature decreases to 10°C, the humidity
sensitive coils will be covered with frost.
In this case, defrost would be ON and compressor OFF, but
the fan is still working.

EMPTYING THE WATER TANK

Publicité

Table des Matières
loading

Produits Connexes pour purline PLQ10M

Table des Matières