BOMANN TSG 7402 Mode D'emploi page 73

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 37
Crystal glass
-
Steel items subject to rusting
-
Wooden platters
-
Items made from synthetic fibres
-
.. .. .. ..are limited suitable
are limited suitable: : : :
are limited suitable
are limited suitable
some types of glasses can become dull after
-
many washes
silver and aluminum parts tend to discolor during
-
washing
Glazed patterns may fade if machine washed
-
frequently
Recommendations for loading
Recommendations for loading
Recommendations for loading
Recommendations for loading
• Make sure that the tableware is placed securely
and cannot tip over.
• Place all items so, that the spray arms can rotate
freely during rinsing.
• Arrange all items with openings facing down.
• Curved items, or ones with recesses, should be
loaded aslant so that water can drain off.
• Make sure that glasses do not touch each other.
• Set the dishes and cutlery not into each other or
covering each other.
• Arrange cutlery on the cutlery shelf.
• Store long as well as sharp cutlery horizontally in
the dishwasher basket.
Methods for load
Methods for loadin in in ing normal dishware
Methods for load
Methods for load
g normal dishware
g normal dishware
g normal dishware
Loading the dishwasher
Loading the
dishwasher basket
Loading the
Loading the
dishwasher
dishwasher
Load the dishwasher basket by size and from both
sides to the middle. The maximum plate size is
26 cm.
basket
basket
basket
1 1 1 1 Dinner plates
2 2 2 2 Soup plates
3 3 3 3 Dessert plates
Loading the cutlery shelf
Loading the cutlery shelf
Loading the cutlery shelf
Loading the cutlery shelf
WARNING: Risk of injury!
WARNING: Risk of injury!
WARNING: Risk of injury!
WARNING: Risk of injury!
Knives and other utensils with sharp points must be
placed with the tip down in the cutlery shelf or in a
horizontal position in the dishwasher basket.
Sort the cutlery evenly distributed, vertically with the
narrow side, so that the water can run off. Especially
long, large parts are granted on the middle of the
shelf.
Depending on the space required for loading the
dish, the cutlery shelf can be removed.
Cap / plate holders
Cap / plate holders
Cap / plate holders
Cap / plate holders
To create a better arrangement for bulky dishes, the
cup / plate holders can be folded. Lift the racks slight-
ly and fold them down.
73
4 4 4 4 Glasses
7 7 7 7 Platter
5 5 5 5 Cups
8 8 8 8 Bowl
6 6 6 6 Soucers
9 9 9 9 Bowl
As shown beside the cutlery
shelf need to be add on the
upper left side on the dish-
washer basket.
1 1 1 1 Knife
2 2 2 2 Soup spoon
3 3 3 3 Fork
4 4 4 4 Dessert spoon
5 5 5 5 Tea spoon
6 6 6 6 Serving spoon
7 7 7 7 Serving fork
8 8 8 8 Gravy ladle

Publicité

Table des Matières
loading

Table des Matières