Cleaning The Water Filter; Extraordinary Maintenance; Periods Of Inactivity - Michelin MPX 150 HL Mode D'emploi

CLEANING THE FUEL
FILTER.
Remove and replace the in-
line fuel filter (fig. 13).
Change it from time to time.
TABLE OF ROUTINE MAINTENANCE TO BE PER-
FORMED BY THE USER.
Description of operations:
Check power cable - pipes - high pressure
connectors.
Change and clean fuel filters.
Clean fuel tank.
Clean water filter.
These intervals refer to normal working conditions. For heavy duty use decrease the interval for each job.
For maintenance and/or repairs, use only original spare parts which offer the greatest characteristics of quality and
reliability. Failure to use original spare parts absolves the manufacturer from all liability and transfers it to the
If the machine is to remain inactive for a long period, disconnect the supply sources, drain the tank(s) of all the operating fluids
and protect any parts that could be damaged by the accumulation of dust.
Grease the parts that could be damaged by drying out, such as the supply hoses. When bringing back into use, ensure that
there are no cracks or cuts in the water supply hoses.
Oil and chemical products must be disposed of according to current legislation.
If you no longer wish to use the water cleaner, you should render it unusable by removing the power cable.
You should also make sure that all potentially hazardous parts of the appliance are made safe, particularly for children who could
play with the unused water cleaner.
This product is classified as WEEE type special waste and is covered by the requisites of the new environmental protection
regulations. It must be disposed of separately from ordinary waste in compliance with current legislation and standards.
Do not use parts dismantled for scrap as spare parts.
English
FIG.13
Each use
Every 100 hours
Every 100 hours
Every 50 hours
IMPORTANT:
person carrying out the operation.

PERIODS OF INACTIVITY

SCRAPPING
CLEANING THE WATER
FILTER
Clean the water intake filter
regularly and free it from any
impurities (fig. 14).
TABLE OF

EXTRAORDINARY MAINTENANCE

BE PERFORMED BY THE TECHNICAL SERVICE
CENTRE.
Description of operations:
Boiler:
Clean Coil.
Descale coil.
Oil change in H.P. pump.
Clean fuel pump.
Change fuel nozzle.
Regulade electrodes.
Change electrodes.
Change seals on H.P. pump.
Change lanze nozzle.
Calibrate and check the safety
devices.
- 21 -
FIG.14
TO
Every 200 hours
Every 300 hours
Every 500 hours
Every 200 hours
Every 200 hours
Every 200 hours
Every 500 hours
Every 500 hours
Every 200 hours
Once a year