Disposal And Recycling; Cleaning And Maintenance; Ordering Replacement Parts - EINHELL 41.333.00 Mode D'emploi

Strahlpistole_SPK1:_ 06.02.2009
GB
6. Quick-release coupling
Connect
Push the nipple on your compressed air hose into
the quick-release coupling, the sleeve will automati-
cally spring forwards.
Disconnect
Pull back the sleeve and remove the hose.
Important. As you release the hose coupling,
hold the hose coupling part in your hand to pre-
vent injuries caused by the hose being thrown
backwards.
The compressed air hose is also fitted with a quick-
lock coupling to which accessories can be connected
as described above.
7. Operation
Unscrew the tank (1), fill it with suitable jetting agent
and screw it back into position. Connect the com-
pressed air supply.
Set the air pressure on the compressorʼs pressure
reducer.
The infinitely variable trigger lever (2) allows an
exact dosing of the spray material.
Tip: Before starting work, you should conduct a small
test on a trial workpiece to find the ideal settings for
achieving perfect results.

8. Cleaning and maintenance

8.1 Cleaning
We recommend that you clean the appliance
immediately after you use it.
Clean the accessories after use with a suitable
cleaning agent (observe the instructions on the
working materials).

8.2 Ordering replacement parts

Please quote the following data when ordering repla-
cement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
6
11:16 Uhr Seite 6

9. Disposal and recycling

The unit is supplied in packaging to prevent its being
damaged in transit. This packaging is raw material
and can therefore be reused or can be returned to
the raw material system.
The unit and its accessories are made of various
types of material, such as metal and plastic.
Defective components must be disposed of as spe-
cial waste. Ask your dealer or your local council.