Connected Devices; Charger - BASETech BTL4B Mode D'emploi

b) Connected Devices
• Also observe the safety and operating instructions of any other
devices which are connected to the product.
• Before connecting, make sure that the USB power source
can deliver sufficient current, otherwise you may damage the
source. Do not use a USB port of a computer, keyboard or USB
hub without a power adapter as the current supplied by these
ports is insufficient.
c) Charger
• This charger only works with Ni-MH and Ni-Cd batteries. Never
use the charger with other types of batteries as this could result
in explosion, cracking or leaking causing damage to property
and/or personal injury.
• Never use the product immediately after it has been brought
from a cold room into a warm one. The condensation generated
could destroy the product. Allow the product to reach room
temperature before connecting it and putting it to use. This may
take several hours.
• When the charger is not in use, disconnect it from the power
supply and remove any batteries from the charging slots.
27