Cautions On Use - Panasonic CF-VDR291U Instructions D'utilisation

EASY MEDIA CREATOR
How to access the Online Manual
After running each utility, you can access the online manual.
Creator Classic
Select [Help] from the menu, and them select [Creator Classic Help Center].
Disc Copier
Select [Help] from the menu, and them select [Disc Copier Help Center].
Label Creator
Select [Help] from the menu, and them select [Label Creator Help Center].
Drag-to-Disc
Select
E
Roxio Retrieve
Select

Cautions on Use

<When using Drag-to-Disc>
In the following cases, first log off and then log back on.
When [Drag-to-Disc drive] does not appear on the menu even after right-clicking the
file and selecting [Send to].
When an error message is displayed after right-clicking the file and selecting [Send to]
- [Drag-to-Disc drive]
Do not use Drag-to-Disc to write data on a disc which was formatted using software other
than Drag-to-Disc. You may not be able to write data on the disc using any other software.
When a CD cannot be formatted with Drag-to-Disc, try formatting it with the administrator
authority.
<Only for CF-29CR***** and CF-29DR***** model>
EASY MEDIA CREATOR will not start up if the resolution setting is left at 800 × 600.
To use EASY MEDIA CREATOR, set the resolution to 1024 × 768 by following the
steps below.
1 Log on to Windows with the administrator authority.
2 Right-click on the desktop, and select [Properties] - [Settings] - [Advanced] - [Monitor].
3 Delete the check mark from [Hide modes that this monitor cannot display].
If operations are to be performed by another user, first log off, and then have the user
concerned log back on.
4 Right-click on the desktop, select [Properties] - [Settings], and set the resolution on
1024 × 768.
When the resolution has been set to 1024 × 768, the whole screen is scrolled by operating
the mouse. Since the touch screen will not work properly, use the touch pad or external
mouse.
To shut down EASY MEDIA CREATOR, set the resolution to 800 × 600.
14
on [Drag-to-Disc] screen.
on the top left of the corner, and then select [Roxio Retrieve Help Center].