Esscom PL-1085 Mode D'emploi page 43

PL-1085
7.2 Privacy
The Privacy dialog screen is used for managing the security of the local
network. All PL-1085 devices are shipped using a default logical network
(network name), which is normally "HomePlug". The Privacy dialog screen
allows you to make the network private by changing the network name
(network password) of your devices. You can always reset the network
password to default (HomePlug) by clicking on the Use Default button.
The Private Network Name is composed of 4 up to 24 alphanumeric case-sen-
sitive characters.
Note :
Changing the network name to any other name other than HomePlug will
show the network type on the main screen as Private.
Click the Set Local Device Only button to change the network name
(network password) for the local device connected directly to the computer.
After doing this, all the devices seen on the Main panel prior to this will no
longer be able to communicate or respond to the computer.
Devices previously set up with the same logical network (same network name)
will appear in the device list afterward selecting this option.
The Set All Devices button is used to change the logical network of all
devices that appear on the Main panel. The user must have entered the
device's Password in order to set it to the new logical network. A notification
message will appear to report the success of this operation.
43