Main Screen - Esscom PL-1085 Mode D'emploi

PL-1085
3. After successful installation an icon will appear on your desktop :
7 Configuration
To start the utility, double click the PowerPacket Utility icon on your desktop.
7.1

Main Screen

The Main screen provides a list of all PL-1085 devices connected to the
computer where the utility is running.
The top panel shows all local PL-1085 devices connected to the computer's
NIC (Network Interface Card). In most cases, only one device will be seen. If
more than one device is connected, you can select the device and click the
Connect button. The status area above the button indicates that your PC is
connected.
The lower panel displays all the PL-1085 devices, discovered on the current
logical network (remote devices). Displayed above this panel is the number of
40