Fonctionnement De L'aspirateur; Turning The Power Switch On Or Off - Samsung SR8850 Manuel D'utilisation

Fonctionnement de l'aspirateur

INSTALLING THE ROBOTIC VACUUM CLEANER
INSTALATION ORDER

1. Turning the Power Switch on or off

To use the robotic vacuum cleaner, you must turn on the Power Switch at the
bottom of the main unit.
2. Installing the Charger
To charge the robotic vacuum cleaner, you must irst install
the charger.
Since the battery is discharged when the product is
purchased, you must fully charge the battery before use.
3. Charging the Battery
You should charge the battery completely before using the
robotic vacuum cleaner.
4. Réglage de l'heure
Vous devez régler l'heure pour pouvoir utiliser les options de
nettoyage programmé et quotidien.
5. Installing the VIRTUAL GUARD
You can conine the robotic vacuum cleaner to a particular section by using Fence
(virtual wall) mode or clean several sections one by one using Guard (virtual door)
mode.
TURNING THE POWER SWITCH ON OR OFF
To use the robotic vacuum cleaner, you must turn the
Power Switch on.
If you turn the Power Switch off, all settings will be reset.
1. Turn over the main unit and turn the Power
Switch on.
- If the icons are not turned on, it indicates that the
battery charge is depleted. In this case, dock the
robotic vacuum cleaner to the charger station after
turning the Power Switch on.
- The conigured time may be different from the current
time. If the conigure time is incorrect, set the time to
the current time.
If the Power Switch is turned off, the robotic vacuum cleaner will not be charged
even if it is docked with the charger station.
ATTENTION
20_ Fonctionnement de l'aspirateur