How Use The Food Probe - Fulgor Milano FCSO 4510 TEM Instructions Pour L'installation Et L'utilisation

WARNING
• To avoid burns, use a kitchen glove to fit and remove the
meat probe when the oven is hot.
• Always remove the probe using the grip. If it is removed
by pulling the cable, it could suffer damage.
• Make sure the food is completely de-frozen when the
probe is fitted. Otherwise it could suffer damage.
NOTE: - The meat probe is not enabled for all functions (meat
probe function not available also for Recipes).
If it is fitted during one of these functions, a probe
removal message appears on the screen.
- If the meat probe is accidentally removed during
operation, a warning message appears on the
screen.
- The temperature of the probe can be set between
104°F and 212°F (40°C - 100°C).
- The oven stores the last temperature set by the user.

How use the food probe

As you can see from Figure, the probe socket is located in the
upper left corner of the oven chamber, protected by a metal
cover with plug.
Remove the cover and insert the plug of the probe all the way
(you will hear a slight confirming click).
Insert the probe in the food without touching fatty parts or
bones.
WARNING
Remember that the probe will not work if it is connected
when the oven is already switched on!
Insert the tip of the probe in the central and thickest part of the
meat.
Make sure the probe is not in contact with the fat, bone, oven
parts or dishes.
The meat probe is automatically recognised when it is inserted
and the icon appears on the screen.
When a cooking mode is started with the probe inserted, the
display page for setting the function appears automatically.
11:00 am
1. Set the required probe temperature by means of the arrows
and confirm with the
TRUE CONVECTION
275°F
11:00 am
2. After pressing the key, cooking starts and all probe
cooking details appear on the screen.
• Cooking mode
• Oven temperature
• Set probe temperature
• Instantaneous probe temperature
Once the set probe temperature is reached, the oven switches
off and an acoustic signal warns that cooking has terminated.
NOTE: After cooking has started, the oven temperature can
in any case be changed at any time by means of the
arrows .
To change the probe temperature, press the
the key and finally, the
325°F
+ +
145°F
- -
key.
+ +
325°F
- -
145°F
70°F
key and then
key again.
EN
21