Dynex DX-E402 Guide De L'utilisateur page 8

8
• If you chose Static IP, the Static IP settings page opens.
Note: The IP parameters should be provided by your ISP.
7 Click Next. The Quick Setup - Finish page opens.
8 After finishing all configurations of basic network parameters, click Finish to complete
the process and exit.
Configuring your router (advanced)
Login
You can access the router settings to configure the advanced functions of your router. There
are ten main menus on the left of the Web-based utility. Submenus are available when you
click one of the main menus. The ten main menus are:
• Status
• Quick Setup
• Network
• DHCP
• Forwarding
• Security
• Static Routing
Enter the following:
- IP Address—This is the WAN IP address as seen by external users on the Internet
(including your ISP).
- Subnet Mask—The Subnet Mask used for the WAN IP address, and it is usually
255.255.255.0
- Default Gateway—The gateway, if required.
- Primary DNS—The DNS Server IP address, if required.
- Secondary DNS—If your ISP provides another DNS server, enter it into this field.
Setting up and using your router