Dynex DX-E402 Guide De L'utilisateur page 17

Appendix - FAQ
Notes:
- Sometimes the connection cannot be disconnected although you specify a time to Max Idle
- If you are a cable user, configure your router following the above steps.
I'm an Ethernet user. How do I configure my router to access the
Internet?
To configure your router to access the Internet:
1 Log in to your router, click Network on the left of your browser, then click WAN. The
WAN page opens.
2 On the WAN page, select Dynamic IP for WAN Connection Type. Enter the user name
password, then click Save.
3 If your ISP requires you to register your MAC address, log in to your router and click
Network on the left of your browser, and then click MAC Clone. The MAC Clone page
opens.
4 If your computer's MAC address is a proper MAC address, click Clone MAC Address
and your computer's MAC address fills in the WAN MAC Address field.
- OR -
If this does not work, enter your computer's MAC address in the WAN MAC Address
field (the format for the MAC address is XX-XX-XX-XX-XX-XX).
5 Click Save. The settings take effect after you reboot.
I want to use Netmeeting. What do I need to do?
If you start Netmeeting as a sponsor, you don't need to do anything with your router. If you
start Netmeeting as a responder, you need to configure a Virtual Server or DMZ Host.
To configure a Virtual Server:
1 Log in to your router, click Forwarding on the left of your browser, then click Virtual
Servers. The Virtual Servers page opens.
Time, since some applications visit the Internet continually in the background.
17