Harman Kardon CITATION 200 Mode D'emploi page 13

1. Information on power consumption. This equipment complies with
European Commission Regulation (EC) No 1275/2008 and (EU) No
801/2013.
Off
(all wireless connections are deactivated)
Networked standby
2. The period of time after which the power management function
switches the equipment automatically into:
Off
Short press power key
Networked
If the device is connected
standby
with Bluetooth or Wi-Fi
3. If this equipment has wireless network connections:
How to activate wireless network connections:
•
Set up the product according to instructions;
•
Switch into wireless mode (Bluetooth or Wi-Fi);
•
Connect with energy using product(s).
How to deactivate wireless network connections;
•
Short press power key to turn off the device.
0.5 Watt
2.0 Watt
the device shall enter
2.0 Watt networked
Standby automatically
in 20 minutes.
This device complies with Part 15 of the FCC rules and Industry Canada
license-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. CAN ICES-3 (B) /
NMB-3 (B).
IC Caution:
User should also be advised that:
(i) the device for operation in the band 5150 - 5250 MHz is only for
indoor use to reduce the potential for harmful interference to co-
channel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands
5250 - 5350 MHz and 5470 - 5725 MHz shall comply with the e.i.r.p.
limit: and
(iii) the maximum antenna gain permitted for devices in the band
5725 - 5825 MHz shall comply with the e.i.r.p. limits specified for point-
to-point and non point-to-point operation as appropriate.
(iv) Users should also be advised that high-power radars are allocated
as primary users (i.e. priority users) of the bands 5250 - 5350 MHz and
5650 - 5850 MHz and that these radars could cause interference and/
or damage to LE-LAN devices.