INSTALLING THE REFRIGERATOR (Cont.)
REMOVING FREEZER DRAWER (on some models) (Cont.)
REINSTALL FREEZER DRAWER FRONT
3
A. Pull the rail assemblies to the maximum
extension.
B. Locate the slots on the inside of each slide.
C.
assembly extensions into the slots near the
back of the slides.
49-60805-1
Installation Instructions
Hook
Slot
Side Tab
D.
assembly so the side tabs fit into the front slots
on the rail assemblies.
E. Replace the safety screws in both sides of the
slide assemblies.
F. Replace lower and upper baskets (see About
27