GE GYE18J Manuel D'utilisation Et Instructions D'installation page 30

INSTALLING THE REFRIGERATOR (Cont.)
WARNING
leaving off parts, or overtightening screws, can lead
to the door falling off and result in injury and property
damage.
REINSTALL FREEZER DOOR
2
A. Using a Torx T-20 screwdriver, remove the
bolts securing the door stop on the bottom
right of the door.
B. Using a Trox T-20 screwdriver, remove the
plastic force closure on the bottom right of the
door.
C.
the bottom left of the door.
D.
door.
E.
the hinge pin in the bottom hole of the door.
F. Straighten the door and line it up with the
wrench, turn the hinge pin until it extends
through the hinge bracket and into the door.
30
Installation Instructions
REINSTALL FRESH FOOD DOOR
3
A. Using a Torx T-20 screwdriver, remove the
bolts securing the door stop on the bottom
right of the door.
Plastic Thimble
B. Transfer the plastic thimble to the opposite
thimble on the opposite side.
C. Using a Trox T-20 screwdriver, remove the
plastic force closure on the bottom right of the
door.
D.
the bottom left of the door.
E.
door.
F. Lower the fresh food door and make sure to
insert the hinge pin in the bottom hole of the
door.
G.
the hinge over and remount to hinge base.
Hinge base
Hinge
49-60805-1