Sanitas SFT 65 Mode D'emploi page 27

Measuring body temperature on the forehead
If the measured value is within the normal range (< 100.4 °F/38 °C), the green LED lights up for 3 seconds. If the meas-
ured value is higher (≥ 100.4 °F/38 °C, high temperature), the red LED is illuminated.
Measuring surface temperature
• Press the button for 1 second to switch the thermometer on. Following a successful self test, the device emits
two short beeps.
• Then press the and
symbol appears in the display.
• Press and hold the
immerse in liquids), maintaining a distance of 3 cm.
• Release the or
value appears on the display.
Please note that the displayed temperature is the measured and not the adapted surface temperature. It is not the same
as the forehead/ear temperature.
To switch back to the Ear/Forehead thermometer mode, press the
until the symbol disappears and there is a short beep. By switching the thermometer off and on again, it automatically
exits the Object temperature mode.
Please note that the forehead/temples must be free from sweat and cosmetics and that
taking vasoconstrictive medication and skin irritations can distort the result when measuring
temperature on the forehead.
• Press the button for 1 second to switch the thermometer on. Following a successful
self test, the device emits two short beeps.
• Place the measuring head with the forehead/cover cap fitted on the temples, hold down
the button and move the thermometer smoothly over the forehead to the other
temple.
• Then release the
beep and the measured value appears on the display.
buttons simultaneously for 3 seconds to switch to the Object temperature mode. The
or button and point the sensor tip towards to the object or liquid to be measured (never
button. The end of the measuring time is signalled with a short beep and the measured
button. The end of the measuring time is signalled with a short
and buttons simultaneously for 3 seconds
27