CRH Leviat HALFEN FPA-SL30 Mode D'emploi page 4

HALFEN FPA-SL30
1. Installation cast-in component FPA-E-SL30
Polystyrene ®
Recess former
Cross bar
1.1

CS
CS: Concrete surface
1.2
4
Ang g led bracket

Important:
Minimal concrete coverage
– ensure the concrete is
properly compacted!
CS: Concrete surface
Shaped
bracket
   
CS
Formwork
Auxiliary
construction
Slab
reinforcement
CS
Concrete
c
nom
© 2020 HALFEN · INST_FPA-SL30 01/19 · www.halfen.com
Assembly Instructions
FPA-SL30
i
The FPA-E-SL30 is delivered
pre-assembled
Fix the cast-in element
1.1
(shaped bracket) with nails
to the auxiliary aid.
Nail holes are provided in
the shaped bracket and in
the angled bracket.
The auxiliary aid must
be fl ush with the fi nal
concrete surface! 
CS = bottom surface
auxiliary aid!
Fix the auxiliary aid to the
1.2
formwork. Planned concrete
cover at the (hexagon) bolts;
c = f − 26 mm.
nom
Install the slab reinforcement
over the cast-in element up to
the edge.
Pour the concrete for the pre-
1.3
cast component and compact
the concrete properly
(not illustrated).
f
Slab
reinforcement
Auxiliary
construction