CRH Leviat HALFEN FPA-SL30 Mode D'emploi page 10

HALFEN FPA-SL30
5. HFV-SL30 installation (continued)
5.4 Double dowels must be installed with an axial spacing of 180-200 mm.
As Ø 6 additional reinforcement: 4 × L = 250 mm, 1 × L = 450 mm, 1 × L = 600 mm B500A/B - A4 centrally arranged
5.4
Example: HFV-SL30 with bottom cover
Slab reinforcement
Example: additional reinforcement with double dowel
10
∼ 140
L=250mm
L=450mm
180 ‒ 200
Assembly Instructions
L=600mm
In accordance with the static require-
ments of the slab design, at least one
single-layer of steel or non-steel mesh
reinforcement must be installed in the
area of the anchors. An installation
with a solidian GRID Q121/121-
AAE-38 mesh reinforcement is shown
exemplarily.
© 2020 HALFEN · INST_FPA-SL30 01/19 · www.halfen.com
HFV-SL30