Slip Clutch; Maintenance Measures; Environmental Protection - Flex ACH 24 Mode D'emploi

12 Slip Clutch

If the drilling tool become jammed or get caught, the
slip clutch releases.
Remove the load from the machine immediately by
pulling back the drilling tool.
Always hold the machine tightly with both hands and
assume a secure stance.

13 Maintenance Measures

Before all work on the machine itself,
always set the rotational direction switch 7
to the middle position.
Always keep the ventilation slots clean.
Wipe off the accessible plastic parts regularly with a
cloth without cleaning agent.
After heavy use over a long period, the machine
should be taken to a Flex service location for an
inspection and thorough cleaning.

14 Environmental Protection

Flex takes back worn-out machines for
the purpose of resource-saving recy-
cling. As a result of their modular con-
struction, Flex machines can be very
easily dismantled into their reusable
materials.
Akku
Recycling
Do not open battery and dispose of it through the
available collection points.
Do not place the battery on any heated surface or
expose it to strong sunlight for a longer period of time.
Do not expose the battery to temperatures over 50 °C.
Give your worn-out Flex machine to your dealer or
send it directly to Flex.
Subject to change without notice
English
15
Defective
rechargeable
batteries must
be recycled
according to the
Guidelines
91/157/EEC.
Do not throw
used batteries in
household waste,
in fire or in water.