Assembling The Blower Tubes - EGO LB6000 Guide D'utilisation

ASSEMBLING THE BLOWER TUBES

WARNING:
injury, always remove the battery pack from the tool when assembling parts.
1. There are two tubes for the blower: a
front tube and a middle tube (Fig. 3).
2. First attach the front tube onto the
middle tube. Align either of the
grooves in the front tube with the
knob on the middle tube (Fig. 4).
3. Push the middle tube forward until
the knob engages either of the
grooves. Then rotate the middle tube
in the direction of the arrow until the
knob slides into the lock position
(Fig. 5 & 6).
NOTICE: Before the middle tube is locked
into place during rotation, you will notice
a built-in stop that will create some
resistance. Continue to rotate the tube past
the stop until it slides fully into the lock
position.
5
56V-VOLT LITHIUM-ION CORDLESS BACKPACK BLOWER — LB6000
To prevent accidental starting that could cause serious personal
3
4
Grooves for different
lock positions
6
Lock positions
Front Tube
Middle Tube
Knob
15