Calibration Board 6430; Fitting Calibration Board To Stand; Fitting Calibration Board To Adjustment Beam - Beissbarth VAS 6430 Notice Originale

en | 24 | VAS 6430 | Product description
5.4

Calibration board 6430/4

Fig. 14: Front view of calibration board
5.4.1

Fitting calibration board to stand

1. Attaching calibration board to stand
|
1 690 386 012 2013-09-24
1. Top view
2. Stop pin
5.4.2

Fitting calibration board to adjustment beam

Fig. 15: Rear view of calibration board with slide unit
1. Move the calibration board to the centre position.
2. Slide down the clamping pieces on the back of the
frame.
Beissbarth GmbH