Roller Grill GES 80 Notice D'installation Et D'utilisation page 18

b) First starting:
Before the first use, remove the anti-corrosion protection fat with a cleaner. Then, it is
necessary to grease plates with oil. Then proceed to the seasoning of the cast iron
plates:
For that:
- Grease the plates with alimentary oil
- Plug in the waffle iron and turn the thermostat/commutator knob (n°3 on picture) on
the maximum position. The pilot lights ignite
- Close the upper plate and let the waffle iron work during 30min.
- After this seasoning phase, the two first waffles will be very bad looking,
- To finish operation, oil slightly the plates. Your machine is operational
First cleaning
Clean the device and the accessories before the first use. (See 6 Cleaning)
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the values
indicated on the descriptive plate.
- Check that neither the cord nor the plug are damaged
- Make sure that every control knob is positioned on 0.
- Unwind completely the electric power cable and connect it in a plug connected with
the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly
on the electricity network, confide its connection to a qualified person.
c) Use of device :
Elements of command and display
Command/Display
Thermostat /commutator
(n°3 on picture)
Green pilot light
(n°1 on picture)
Orange pilot light
(n°2 on picture)
Never use the machine without drip trays (n°4 and 5 on picture).
Function
Temperature setting
Machine on (pilot light on)
Machine off (pilot light off)
Machine is heating (pilot light on)
Temperature reached (pilot light off)
18