Turning On / Off - Burg Wächter LASER METER 20 PS 7520 Mode D'emploi

Turning on / off

Turn the device on or off by pressing the on / off button
until a short audio signal can be heard. The laser
CLEAR
distance meter is immediately ready for measuring
distances. After 30 seconds of disuse, the laser is being
deactivated automatically, after 3 minutes without
activity the entire device shuts down automatically.
Setting the reference plane
At the meter, two different reference planes can
be selected:
• Front edge of the device, to e. g. measure from
an edge
• Back edge of the device, to e. g. place it against
a wall
To change the reference plane, please push the button
. The activated plane is being shown on the display.
Ill. 3: Possible reference planes
With every turn-on of the device, the reference plane
is set on back edge.
22 | English LASER METER 20 PS 7520