Burg Wächter LASER METER 20 PS 7520 Mode D'emploi page 19

Operation
Applying and removing the clamp
Through snapping-in, the mounting clap can easily
be attached to the back of the device. To remove it,
push the button on the bottom of the device and
simultaneously slide off the clamp.
Ill. 1: Removing the mounting clamp
Inserting / exchanging batteries
If the mounting clamp is attached, you need to remove
it first. The battery case cover can now be removed by
pushing up the looking hooks and at the same time
pull the cover up. Now, insert the batteries according
to the marking inside the battery case. Please consider
the appropriate polarity.
Ill. 2: Inserting batteries
Subsequently, close the battery case cover again.
Attention: Remove the batteries from the device
if not in use for a longer period of time.
7520 LASER METER 20 PS 7520
A
B
English | 21