Specific Safety Rules - Ryobi RLT36 Traduction Des Instructions Originales

be performed. Use of the power tool for operations
different from those intended could result in a
BATTERY TOOL USE AND CARE
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
Use power tools only with specifically designated
battery packs. Use of any other battery packs may
When battery pack is not in use, keep it away from
other metal objects like, paper clips, coins, keys,
nails, screws, or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
SERVICE
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is

SPECIFIC SAFETY RULES

WARNING
When using the product, the safety rules must be
please read these instructions before operating the
WARNING
This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
the machine while people, especially children, or
Avoid using machine in bad weather, especially if there
2
Keep hands and feet away from the cutting means at
Thoroughly inspect the area where the machine is to be
used and remove all rocks, sticks, metal, wire, bones,
Switch off and disconnect from the power supply before:
– servicing
– leaving the trimmer unattended
– cleaning your trimmer
– changing accessories
–
– checking for any damage if the trimmer starts to
vibrate abnormally
– performing maintenance
MAINTENANCE
After extending new cutter line, always return the
product to its normal operating position before switching
Check all nuts, bolts and screws at frequent intervals
for proper tightness to ensure the product is in safe
properly repaired or replaced by an authorized service
When not in use, the product should be stored in a cool
Always ensure that ventilation openings are kept clear
Inspection after dropping or other impacts
Thoroughly inspect the product and identify any affections
properly repaired or replaced by an authorized service
English