Overview; Intended Purpose; Function Description - Grizzly BLS 30 Traduction De La Notice D'utilisation Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31
Do not overload your device. Work
only within the indicated range of
performance. Do not employ any low
power machines for heavy work. Do
not use your device for purposes for
which it has not been designed.
Do not attempt to repair the appliance
yourself unless you have specific train-
ing to do so. Leave any work not listed
in this manual to our Service Centre
(See p. 145 for the address).
Check the grass bag regularly for
wear or damage.

Overview

See the front fold-out page
for illustrations.
1 Flat suction nozzle with wheels
A
2 Two-part blower / suction tube
3 On / OFF switch
4 Attachment bar for carrying strap
5 Throttle
6 Starter handle with starter cable
7 Choke lever
8 Fuel pump (Primer)
9 Filler cap
10 Fuel tank
11 Operating mode selection switch
12 Collection bag

Intended purpose

The device is designed only for the blow-
ing and suction and of dry leaves in private
households and as a hobby device in the
garden. Every other utilization, which is not
explicitly approved in these directions, can
lead to damage to the device and repre-
sents a serious danger to the user.
The device must not be employed in areas
where there is health endangering dusts or
as a wet suction device.
The device is designed for use by adults.
Young people over 16 years may use the
device under supervision only. The use of
the device in the rain or in a humid environ-
ment is forbidden.
The operator or user is responsible for ac-
cidents or damage to other persons or their
property.
The manufacturer is not liable for damage
which is caused through inappropriate use
or incorrect operation.

Function description

The garden vacuum has a blowing/vacuuming
unit for the blowing and suction functions. In
blowing mode, you can quickly blow together
fallen leaves or blown them out of places that
are difficult to reach. In suction mode, the
leaves are shredded to save space, and blown
out of the ejector outlet into the collection bag.
The collection bag is fitted with one-sided inner
lining to prevent fine dust and wetness from
penetrating the bag to the outside. This lining
is located on the left-hand side of the bag to
protect your working clothes from soiling.
You can vacuum up dry leaves and leaf parts
on the flat with the flat suction nozzle. The
guide rollers at the lower end of the tube
make it easier to guide the tube along the
ground. For the protection of the user,
the equipment is to be operated only
with the two-part blow/suction pipe
fully fitted.
Refer to the following descriptions for instruc-
tions on how the operating controls work.
GB
85

Publicité

Table des Matières
loading

Table des Matières