Cabling Tv Sets (Other) - Transmitter Module - Individual Sound - Loewe Wireless Rear I Sound Mode D'emploi

Connecting up
Cabling TV sets (other) – Transmitter module – Individual Sound
• Please refer to the directions in the
assembly instructions.
• Plug the stereo Cinch Klinke cable
supplied into transmitter module
in socket AUDIO 1 and to the sub-
woofer in the sockets Surr R/L.
• Use the audio link cable to connect
the subwoofer to the TV set.
• The power supply provided is to
be fitted with the plug adapter
suitable for your country. Take
the adapter and plug it into the
contact strip of the power supply.
The adapter can only be plugged
on the right way around and is
then slightly to one side. Then
push it to the middle until it clicks
into place.
• Plug the plug of the power sup-
ply into the socket DC IN on
the transmitter module. Plug the
power supply into a 0-40V
50 Hz socket.
- 4
Transmitter module
0-40 V 50 Hz
Power supply
Loewe Flat TV set
Loewe Flat-TV
DC cable
Subwoofer Loewe Individual Sound
Loewe Individual Sound System (Subwoofer)
Power OUT
R
Surr.
L
R
Bass Intensity
Front C
Min.
L
0
Line IN
Crossover Frequency
Right Subw. Left
Surr.
Front 50
Right Center Left
230V~50/60Hz
System connector
Stereo Cinch
Klinke cable
Audio link cable
ON
OFF
Max.
Phase
180
250.