Hkoenig STM10 Manuel D'utilisation page 9

CLEANING AND CARE
This product contains no user serviceable parts. Refer to
qualified service personnel.
CLEANING STEAMER EXTERIOR
1 . Make sure steamer is off, unplugged and completely cool.
2 . Wipe the plate and outer surface with soft, damp cloth. Water
and small amounts of gentle household soaps, such as
dishwashing liquid, can be used on the exterior. Never use
heavy-duty cleaner, or abrasive scouring pads that may
scratch or discolor the steamer.
3 . After the steamer has been thoroughly dried, turn it back on
and lightly steam over an old cloth. This will help remove any
reside left in the steam holes.
4 . When finished cleaning, turn the steamer off by pressing the
power button until the blue power light turns off (about 2
seconds). Unplug, empty tank, and allow time to cool before
storing.
5. Unplug the appliance during filling and cleaning.
CLEANING FRAMES AND ACCESSORIES
For all accessories, allow to fully dry before using again or
storing Accessories are not suitable for cleaning in a washing
machine.
▪ Brush frame : Wipe with damp cloth to clean.
▪ Delicate frame : Wash with cold water and small amounts of
gentle cleanser if needed . The fabric in the frame cannot be
removed.
▪ Ironing pad : spot treat as needed with cold water and gentle
cleanser.
STORING THE STEAMER
1. Check that the steamer is unplugged and
completely cool.
2. Gather the cord into even ovals and then gently
cinch
with the strip of hook and loop .( Q )
3. Always store steamer upright on its base to prevent water