Contacts Manag; Chiller - LEGRAND 674 56 Notice D'emploi

4 - Customisations

Contacts manag.

✔
The Unit is able to manage additional contacts which make it possible,
for instance when opening the windows to air a room, to switch off the
heating in that area so as to save energy. In this menu you can enable
or disable this function.
Select Contacts manag. in the Setup
menu using the keys
Press the key to confirm
A screen will be displayed showing the
indication of the current state (State:
disabled)
Press to change the status
Hold down the key to end pro-
gramming and to return to the
main screen
✔
If Climaveneta Idrorelax products are installed in your system this menu
will appear, which will allow you to change its settings.
Contrast
Diagnostic
Select Chiller in the Setup menu
using the
Probes
Contacts manag.
Press the
A screen will be displayed showing the
State:
indication of the current state (State:
disabled
Chiller OFF)
The following functions are available
Enable
for the selected zone:
Use the
function required
State:
enabled
Press the
Disable
62

Chiller

keys
key to confirm
keys to select the
key to confirm
Diagnostic
Probes
Contacts manag.
Chiller
State:
Chiller OFF
Chiller ON
Chiller ON
Sanitar y water
Chiller OFF