Model with ON/OFF version
1
1 Heating plate
2 On/Off button
3 Mains presence LED
4 Power cord
SWITCH-ON
• Connect the power plug 4 to the mains socket in accordance with the safety war-
nings described previously.
• Set the button 2 to ON. The LED 3 will light up.
The straightener is ready for use 30 seconds after being switched on.
STRAIGHTENING
Refer to the „Straightening tips" when you wish to straighten the hair.
SWITCH-OFF
• Set the button 2 to OFF. The LED 3 will go off.
• Do not pull the Disconnect the power cord 4 from the mains socket. Place it in a
safe place and wait as long as is necessary for the straightener to cool completely.
• Take care not to wind the power cord around the straightener when storing it.
MAINTENANCE
GENERAL CLEANING
• Always disconnect the power cord from the mains socket and make sure the
straightener is completely cool before cleaning.
• Avoid all risk of electric shock by not clean the appliance with water and do
not immerse it in water.
• Do not use abrasive solutions or concentrated detergents.
• Clean the exterior with a soft cloth or slightly damp cloth.
• Clean the heating plates with a slightly damp cloth and a mild detergent.
• After use, make sure that all parts are completely dry.
DISPOSAL
The product packaging is made of recyclable materials. Separate the parts
according to their type and dispose of them in accordance with applicable
laws on the environmental protection.
In accordance with the European Directive 2002/96/EC (WEEE), the unused
appliance must be disposed of appropriately at the end of its life cycle. This
concerns the recycling of useful parts of the appliance and allows a reduction
in the environmental impact. For more information, please contact your local
waste disposal facility or appliance retailer.
10
2
3
4