Trebs 99515 Mode D'emploi page 25

PLEASE NOTE

You can press the RESET button of the emitter to renew the default factory SSID and
password;

When you change the SSID and password, you have to erase the network in the "Settings",
and then reconnect to the new network. Otherwise login error will remain displayed.
2.3.1 Special settings for Android 4.3 users
Due to the forced internet settings in android 4.3 you must change the
settings in the Wifi settings of the used device.

Go to: settings -> Wifi -> menu button -> advanced;

Change the allow scanning setting, and the auto network switch
setting to unchecked (see picture);

Now your Android 4.3 device stays connected.
2.4 Operations for Apple iOS-app
Installation APP software:
1. Go to app store;
2. .Search "Sight WIFI" software, and download. The icon looks as following:
Connection WiFi:
The steps below only need to be followed on initial use. After this, the wifi car back camera is already
stored in the default settings of your mobile device.
1. Put your car in reverse after you mounted the camera. This will activate the camera. Now
you can connect to you mobile device.
2. Go to settings in the main interface of your mobile device.
Click "Wi-Fi ", select your camera, and connect the wifi of the mobile device terminal to the wifi of
the tool. The initial SSID of the device is "WIFICAMERA". Then type in the password of the device
(Default password: 88888888).
25