Handling And Operation; Switching The Device On And Off; Automatic Switch-Off; Vinyl Record Operation - SilverCrest SUP 128 A1 Mode D'emploi

Handling and operation

GB
IE
Switching the device on and off
Automatic switch-off

Vinyl record operation

Starting playback of vinyl records
14
This section provides you with important information on handling and using
the device.
♦ To switch the device on, press the ON/OFF button
"On" lamp comes on and PHONO operating mode appears
♦ The POWER
on the display .
♦ To switch off the device press the ON/OFF button again.
The device has an automatic switch-off function and will turn itself off after
15 minutes of inactivity.
♦ To switch the device back on, press the ON/OFF button twice.
♦ Use the PHONO
record playback. The display will read PHONO.
♦ Open the dust cover
♦ Place the record onto the turntable
NOTE
► Make sure that the record is clean and free of dust. Appropriate record-
cleaning brushes and cloths in are available from specialist retailers.
► Use the adapter
♦ Use the turntable speed selection switch
NOTE
► On most records, the rotation speed is printed on the record label.
♦ Remove the protective cap from the stylus
♦ Release the arm rest clip
or button to select the operating mode for vinyl
.
.
to play records with a large centre hole (singles).
to set the required rotation speed.
from the pickup arm
.
.
.
SUP 128 A1