How To Clean - Sinbo SJ 3133 Mode D'emploi

Empty the goblet before unscrewing it from the blade unit.
The goblet can be washed in your dishwasher.
Power unit
Wipe with a damp cloth, then dry.
Wrap excess cord around the bottom of the power unit
Blade unit
Remove the blade unit from out of the base by pushing up from underneath
Remove and wash the sealing ring.
Don't touch the sharp blades –brush them clean using hot soapy water, then rinse
thoroughly under the tap. Don't immerse the blade unit in water.
Lid
Remove the seal using the tab before cleaning the lid.
Wash both parts by hand, then dry.
other parts
Wash by hand, then dry.
Auto clean (P)
1.Pour 500ml warm soapy water in the blender.
2. Rinse, then dismantle and clean the blades as recommended under "blade unit".
3. Dry the parts thoroughly.
Dry mill
Wipe container and cutter with dry cloth only.
Caution:
Never remove or attach container when motor is operating.
Do not open the container or place anything(especially finger,spoon,fork,etc.)in the
container during operation.
ENVIRONMENTAL DISPOSING
You can help protect the environment!
Please remember to respect the local regulations, hand in the non-working
electrical equipments to an appropriate waste disposal center.

HOW TO CLEAN

- 11 -