HOW TO USE
2. Blender
Be sure to tighten container base completely.place ingredients in container,cover
Place container on motor housing.
Plug in ,Select 1 or 2 speeds as required.
Caution:
Maximum Capacity:1000mL
Do not crush ice cubes alone.
Dice solid foods first.Blend with liquid.
Do not operate blender longer than 4 minutes at one time,stop for 2 minutes,then resume
3. Dry mill
Turn mill upside down, and remove cutter base,
Place ingredients in container.
Tightly screw cutter base onto container
Place mill on motor housing
Plug in Hold mill and turn Switch on I or II
Caution:
Maximum capacity: 50g
Not for use with wet ingredients or liquids.
Do not operate more than 60 seconds at one time.
HOW TO CLEAN
Juicer
Before cleaning the unit, always disconnect the power cord from the wall outlet!
The surface of the unit may only be cleaned using a wet cloth. Do not use any detergents
or hard objects, as they may damage the unit's surface!
Wash the removable parts in warm water. Use the supplied brush.
Never clean the unit under running water, do not rinse it, and do not submerge it in
water!
1. Release the locking clip by pulling upwards and tipping it.
2. Open the upper cover.
3. Release the juice drain cover upwards together with the rotating sieve.
4. Remove and clean the pulp container.
5. After you finish cleaning the removable parts, follow the reverse steps to reassemble
the unit.
Blender
Always switch off, unplug and dismantle before cleaning.
Never let the power unit, cord or plug get wet.
- 10 -