Features - AGA marvel AELTTDW Manuel D'utilisation Et D'entretien

• Only connect the dishwasher to the power supply when all installation and plumbing work is complete.
• DO NOT install or store the dishwasher where it can be exposed to below freezing temperatures or
exposed to weather.
• Dishwasher must be secured to adjacent cabinetry using the brackets provided. Failure to do this may
cause damage to property or bodily injury.
• Connect to a properly rated, protected and sized power supply circuit to avoid electrical overload.
The dishwasher is designed for an electrical supply of 120V (volts), 60Hz (hertz), AC, connected to a
dishwasher-dedicated, properly grounded electrical circuit with a fuse or breakers rated for 15 amperes.
Electrical supply conductors shall be a minimum of #16 AWG copper wire rated at 167°F (75°C) or higher.
These requirements must be met to prevent injury and machine damage. Consult a qualified electrician if
in doubt.
• DO NOT use any extension cord or portable outlet device to connect the dishwasher to a power supply.
• Remove the dishwasher door when removing an old dishwasher from service or discarding it. Ensure that
the dishwasher presents no danger to children while being stored for disposal.
• Old appliances may contain materials that can be recycled. Please contact your local recycling authority
about the possibility of recycling these materials.

Features

1
2
3
4
5
6
WARNINGS & SAFETY
1. Upper rack
2. Upper spray arm
3. Cutlery basket
4. Detergent dispenser
5. Door
6. Control panel
7. Guiding track for the upper rack
8. Lower spray arm
9. Filters
10. Lower rack
11. Model and Serial Tag
5
7
8
9
10
11