Rack Accessories
Figure 1
Extra Tall Item Sprinkler (model dependent)
If an item is too tall to be placed in the bottom rack even with the top rack in
the raised position, remove the empty top rack by pulling it out of the dish-
washer until it stops. Pull the front of the rack upward and outward until the
rollers are completely free of the roller guides.
Set the top rack aside. Push the roller guides back into the dishwasher. Insert
the Extra Tall Item Sprinkler into the top rack spray outlet and turn the sprin-
kler clockwise to lock into position. See Figure 1.
Note: Keep the vent on the tub's right side clear by placing tall items such as plas-
tic cutting boards and tall baking sheets on the bottom rack's left side or center.
NOTICE
Do not
block vent
To avoid dishwasher damage, do not reinstall the top rack without removing
the Extra Tall Item Sprinkler.
Flip Tines
Figure 2
The racks consist of tines that can be folded down depending on what you may
need to load in the rack. To fold down, grasp the folding tine and release from
notch. Push folding tine downward to desired position as shown in Figure 2.
Figure 3
Manual Adjustable Upper Rack (model dependent)
Remove the empty upper rack by pulling it out of the dishwasher until it can be
lifted upward as show in Figure 3. Pull the rack up and out until the rollers are
completely free of the roller guides.
Figure 4
Reinsert the rack with the other set of rollers on the roller guides as shown in
Figure 4.
10