3. Check your adjustments
Use a spirit level to check your adjustments. Place the level diagonally on the oven rack or surface
cooktop, and confirm the range is level in the two directions shown below.
FINALIZING THE INSTALLATION
• Move range close enough to the opening to plug into the receptacle.
• Slide the range into position insuring that the rear left (or rear right) leg slides under the Anti-Tip
bracket.
• Carefully tip the range forward to insure that the Anti-Tip bracket engages the back brace and
prevents tip-over.
• Turn on the electrical power. Check the range for proper operation as described in the user manual.
Manual Users_NE58H9950WS_AA_AC_DG68-00531A-00_EN.indd 29
1. Check direction 1.
2. Check direction 2.
If the spirit level indicates that the range is not
level, adjust the leveling legs with a wrench.
English - 29
Anti-Tip bracket
Leveling leg
2014-02-11
2:59:21