Checking The Installation Site; Clearances And Dimensions; Minimum Dimensions; Important - Samsung NE58H9950WS Manuel D'utilisation

CHECKING THE INSTALLATION SITE

Clearances and dimensions

To install the range, refer to the following figure.
CAUTION
CAUTION
cabinet temperatures of 194 °F. Make sure the wall covering, countertops and cabinets around the
range can withstand the heat (up to 194 °F) generated by the range. If not, discoloration, delamination
or melting may occur.
36"~36-4/5"
29-4/5"
* If your cabinet have height over 36-4/5", this range cannot be installed without supporting unit
like hard block.

Minimum dimensions

IMPORTANT

surface units, avoid having cabinet storage space located above the surface units. If you have cabinet
storage space over the heating elements, you can reduce the risk by installing a range hood that
projects horizontally a minimum of 5 inches beyond the bottom of the cabinets.
** 15"
Manual Users_NE58H9950WS_AA_AC_DG68-00531A-00_EN.indd 21
This range has been designed to comply with the maximum allowable wood
3"
Hatched Faces should be
flat and leveled.
35-7/8"
31"
4-1/2"
26-3/10"
28-3/5"
23-1/5"
A
24-7/10"
6-3/10"
48"
26-3/10"
To eliminate the risk of burns or fire caused by reaching over heated
30"
* 30"
English - 21
1/2" min.
1" min.
24"
3"
23-3/16"
25"
B
6"
A : Cabinet opening
A
29-15/16"~30-1/16"
(76.04 - 76.28 cm)
B : Acceptable electrical
outlet area
* 30" minimum clearance between the top of
the cooking surface and the bottom of an
unprotected wood or metal cabinet; or 24"
minimum when the bottom of the wood or
metal cabinet is protected by not less than
/ " of flame retardant millboard covered
1
4
with not less than no.28 MSG sheet steel,
0.015" stainless steel, 0.024" aluminum, or
0.020" copper.
** 15" minimum between the countertop and
the adjacent cabinet bottom.
2014-02-11 2:59:18