Changing The Oven Light (Lower Oven Only); Troubleshooting; Control Display - Samsung NQ70M6650D Série Manuel D'utilisation

Changing the oven light (Lower oven only)

The oven light is a standard 40-watt appliance halogen bulb. It comes on when the
oven door is open. When the oven door is closed, touch
or off. It will not work during a self-cleaning or Hybrid Cleaning cycle.
01
60 English
NQ70M6650DS_AA_DE68-04446A-00_EN.indd 60
to turn the light on
1. To change the halogen bulb, you must
tilt the broil heater down. To do this,
turn the circular nut on the support
counterclockwise while holding the
broil heater. The broil heater should
loosen and tilt down.
NOTE
Important: The broil heater is not a
removable part. Do not force the broil
heater down. Do not let it drop down.
Remove the glass cover.
2.
3. Remove the halogen bulb cover.
4. Replace the halogen bulb.
5. When done, replace the halogen bulb
cover, replace the glass cover, and then
follow Step 1 above in the reverse
order to return the broiler to its correct
position.
CAUTION
Before changing your oven light, disconnect
the electrical power to the oven at the main
fuse or circuit breaker panel. Make sure the
oven and the halogen bulb are cool.

Troubleshooting

Samsung works hard to ensure that you don't have problems with your new
electric oven. If you run into unexpected trouble, look first for a solution in the
tables starting below. If you're still having trouble after trying the suggested
solution, call Samsung at 1-800-SAMSUNG (1-800-726-7864).

Control Display

Symptom Possible cause
The display A fuse in your home may be
goes blank. blown or the circuit breaker
tripped.
The buttons • There is foreign matter
cannot be caught between the
pressed buttons
properly. • Touch model: There is
moisture on the exterior
• The lock function is set
Solution
Replace the fuse or reset the
circuit breaker.
• Remove the foreign
matter and try again.
• Remove the moisture and
try again.
• Check whether the lock
function is set.
1/19/2017 11:53:44 AM