CAME CONNECT GW Mode D'emploi page 13

❺
❻
❼
Connetivity [GSM]
Choose this mode if the module connects to the internet via a mobile GSM/GPRS
network.
the module to identify the external network through which the telephony card may
access the internet services. Generally, telephony operators post this information on
their websites.
❻
Telephone code dialed by the system to establish an internet connection.
Leave the field contents unchanged; change only if required by your GSM
operator.
❼
Some GSM operators require you to enter this data (only do so if required by your
local GSM operator).
This type of configuration requires a
SIM card, enabled to process data, to
be plugged into the module
We suggest contacting your local
mobile carrier to get the information
needed to properly configure the
required parameters.
❺
[APN] ( Access Point Name) is the
essential parameter to enter; it enables
❷
❸
❶
Configuring the operators when no server is present
If in the [Server] section you chose the [No server] option, in the top part of
the configuration screen, this activated the [Operators] section which lets you
configure the characteristics of the operators that the module will communicate
with.
❶
The button lets you add a new operator controlled by the gateway module.
❷
Enter an easy-to-find description of the module.
❸
Choose the type of control panel that will be connected to the operator.