CAME CONNECT GW Mode D'emploi page 11

Description of the configuration parameters
Launch the "Connect GW Configurator" application by double-clicking on the
desktop icon or in the Windows Start menu.
❷
❸
❹
❶
❶
Choose among the available languages for interfacing with the application.
The configurator's main window is composed of two sections.
The [Server] section
It determines which server type the module will communicate with:
❷
Choose this option when you want to control devices that are Came cloud-
connected at the following url http://www.cameconnect.net.
❸
Choose this option when you want to control devices that are connected to a local
server on your LAN.
[IP address / host name] field enter the local CameConnect server's IP
In the
address or host name.
If you enter the host name instead of the IP address, you need to enter the DNS
[Connectivity]
server's IP address in the
In the [Port] field enter the IP port used by the local CameConnect services -
section.
generally, it is port 8080 plus the default value.
❹
If you choose this option, the gateway can then reply to an external request
without being connected to any server.
Only for integrating with other systems.
The [Connectivity] section
It defines and configures which mode the module use to connect to the server.
❺
Choose one of the three available connection modes:
Connetivity [Ethernet]
Choose this mode if the module is connected to a hardwired LAN.
❻
Choose this option if the private network to which the module is connected
features a DHCP server which will assign a dynamic IP address to the module at
each launch.
❺
❻